Philips PXP-40 Printer

The PXP-40 is a small 40 column thermal printer, roughly about 3/4 of the width of the PX-1000. It is inserted into a slot at the left side of the terminal and can be released again by pressing the two release buttons. When unused, it is stored in its transit case.

Each PX-1000 terminal has a built-in RS-232 serial port which is combined with the power connector at the left. The RS-232 connection allows the matching PXP-40 printer to be connected at the left hand side. Power is then connected to the rear of the printer.

Paper can be transported manually by rotating a rigged knob at the left. Paper is loaded from the rear and the roll simply rests inside its bay, with no axle to hold it in place

This is complete with the Philips PX-1000 unit